Zacmi is going to partecipate at Sacramento Convention Center, in California.
Visit our stand: booths 305-309, 12-13 february
Model 0268-V-120 diameter 3560 mm – 120 valves, the largest in the world
It fills 1200 ½ kg size containers per minute.
Transmission organs are totally synchronised electronically: without belts and pulleys, for high efficiency at a low maintenance cost.
The Filler is of the “easy clean” type, designed to facilitate and reduce cleaning to a minimum.
The vacuum is generated by a dry pump, saving thousands of litres of water, with respect for the environment.
The result is a safe and clean working environment.
Watch the video https://youtu.be/0kHR4BwRARk?t=124
See our range of our External Valve Vacuum Fillers on page:
Contact our sales network by filling in this form: https://www.zacmi.com/contacts/
Purpose: monitoring the seaming process to eject the bad cans and control the seamer deviation.
The technique consists in examining the quality of the seaming of each can in real time as it passes through the seamer.
This technique is based on measuring the instantaneous seaming force on each can and analysing this force signal using a microprocessor and specific fast-processing software.
This means that when the cans emerge from the seamer, the system identifies whether they have been weel or badly seamed.
In order to achieve this, the cam must be modified slightly so that the sensor devices, which will give rise to an electrical signal proportional to the force being tested, can be built into it.